RE: Can Someone Convert a Script from NWN2 for Me?

[Legacy_Pstemarie]

               

I found a blacksmith script on the vault but its for NWN2. Can someone that has NWN2 installed open the script and paste the text here?

 

https://www.dropbox....ksmith.erf?dl=0

 

 

               
               

               
            

[Legacy_Pstemarie]

               

Man that was fast - got a message from a user to use notepad++

 

So here's the script:

 

   Spoiler
   

//NPC_blacksmith

//Uncle FB

//06/2009

//Multiple location forge behavior

//Place a general waypoint at the forge tagged "WP_FORGE"

//Place a general waypoint at the anvil tagged "WP_ANVIL"

//Place a general waypoint at the bucket tagged "WP_QUENCH"

//Place an IPOINT placeable at the water level in the bucket tagged "WP_STEAM"

//Place a sound object  "steamlongbursts" tagged "steamlongbursts" at the water level in your bucket

//be certain that the sound object is NOT active (SOUNDS ARE OPTIOINAL)

//Place a sound object "SmithyHammerings" taggeed "SmithyHammerings" near your anvil

//be certain that the sound object is NOT active (SOUNDS ARE OPTIONAL)

//Put this script "npc_blacksmith" in the on heartbeat slot of your blacksmith

//Make sure your blacksmith has the Martial Proficiency in feats

//

#include "ginc_item"

#include "ginc_combat"

#include "ginc_actions"

 

//This portion of the script controls the blacksmith one liners

//Change the int nRand to vary the frequency of speech. Currently this is

//set to 4 =  1 in 4 times speak.

//Change the test within "" in the case statements listed below the line "switch (nRand)"

//to change the one liners the blacksmith speaks

void NpcBlacksmithSpeak (int nSpeak)

{

int nRand = Random (4); //change the integer to vary the frequency of speech

    {switch (nSpeak)

        {

        default:

        break;

        case 1:

            {switch (nRand)

                {

                case 0:

                {switch (Random(4))

                    {

                    case 0:

                    SpeakString ( "This forge isn't hot enough I need more coal");

                    break;

                    case 1:

                    SpeakString ( "Where did I put those tongs?");

                    break;

                    case 2:

                    SpeakString ( "OUCH!");

                    break;                    

                    case 3:

                    SpeakString ( "Jeez another clinker blocking the tuyere!");

                    break;                                                              

                    }

                }

                break;

                default:

                break;

                }

            }

        }

    }

}

 

//Action wrapper for PlayCustomAnimation to allow delay and assign

//no modification necessary

void ActionPlayCustomAnimation(object oNpc, string sAnimationName, int nLooping, float fSpeed = 1.0f)

{

    PlayCustomAnimation(oNpc, sAnimationName, nLooping, fSpeed);

}

 

//Movement function for NPC blacksmith

//no modification necessary

void DelayJump (object oNpc, object oWp1)

{

 

float fDwp1 = GetDistanceToObject (oWp1);

float fDwp2 = GetFacing (oWp1);

float fFactor = GetMovementRateFactor(oNpc);

float fRateVS = (0.75 * fFactor); float fDVS = (fDwp1 / fRateVS);

float fRateS = (1.25 * fFactor); float fDS = (fDwp1 / fRateS);

float fRateN = (1.75 * fFactor); float fDN = (fDwp1 / fRateN);

float fRateF = (2.25 * fFactor); float fDF = (fDwp1 / fRateF);

float fRateVF = (2.75 * fFactor); float fDVF = (fDwp1 / fRateVF);

int nRate = GetMovementRate (oNpc);

int nLocation = GetLocalInt (oNpc, "atloc");

{switch (nLocation)

{

case 1:

break;

default:

 {switch (nRate)

     {

     default:

              break;

              case 2:    

         ActionMoveToObject (oWp1,0,0.0);

         DelayCommand (((fDVS)+0.2), ActionOrientToObject(oWp1,ORIENT_FACE_SAME_AS_TARGET));

         SetLocalInt (oNpc, "ud",0);

     SetLocalInt (oNpc,"atloc",1);

     break;

              case 3:    

         ActionMoveToObject (oWp1,0,0.0);

         DelayCommand (((fDS)+0.2), ActionOrientToObject(oWp1,ORIENT_FACE_SAME_AS_TARGET));

         SetLocalInt (oNpc, "ud",0);

     SetLocalInt (oNpc,"atloc",1);

     break;

              case 4:    

         ActionMoveToObject (oWp1,0,0.0);

         DelayCommand (((fDN)+0.2), ActionOrientToObject(oWp1,ORIENT_FACE_SAME_AS_TARGET));

         SetLocalInt (oNpc, "ud",0);

     SetLocalInt (oNpc,"atloc",1);

     break;

              case 5:    

         ActionMoveToObject (oWp1,0,0.0);

         DelayCommand (((fDF)+0.2), ActionOrientToObject(oWp1,ORIENT_FACE_SAME_AS_TARGET));

         SetLocalInt (oNpc, "ud",0);

     SetLocalInt (oNpc,"atloc",1);

     break;  

              case 6:    

         ActionMoveToObject (oWp1,0,0.0);

         DelayCommand (((fDVF)+0.2), ActionOrientToObject(oWp1,ORIENT_FACE_SAME_AS_TARGET));

         SetLocalInt (oNpc, "ud",0);

     SetLocalInt (oNpc,"atloc",1);

     break;

              }

           }                                              

break;

}

}

}

 

//Main blacksmith function

void main ()

{

object oNpc = OBJECT_SELF;

if (IsInConversation (oNpc) == TRUE){return;}

object oWp1;

object oAnvil = GetWaypointByTag ("WP_ANVIL");

object oForge = GetWaypointByTag ("WP_FORGE"); 

object oQuench = GetWaypointByTag ("WP_QUENCH");

object oSoundObject = GetObjectByTag ("SteamLongBursts");

object oSoundHammer = GetObjectByTag ("SmithyHammerings");

object oEffectObject = GetObjectByTag ("WP_STEAM");

string sHammer = "nw_wblhl001";

string sSword = "nw_wswss001";

string sSword2 = "nw_wswss999";

int nSpeak = 1;   

int nWPcontrol = GetLocalInt (oNpc, "control");

int nRand = Random (3)+1;

SetOrientOnDialog(oNpc, FALSE);

int nWptag = GetLocalInt (oNpc, "wptag");

if (nWptag == 0) {SetLocalInt (oNpc, "wptag", 1);}

 

//Select which waypoint we should be going to and assign it as oWp1 = current waypoint

if (nWPcontrol != 1)

    {

ClearAllActions();

{switch (nWptag)

       {

       case 1: oWp1 = oAnvil; SetLocalInt (oNpc, "control", 1); break;

       case 2: oWp1 = oForge; SetLocalInt (oNpc, "control", 1); break;

       case 3: oWp1 = oQuench; SetLocalInt (oNpc, "control", 1); break;

       }                

   }

}

 

//Get our new waypoint tag, check the distance and perform animations if within range ONLY

nWptag = GetLocalInt (oNpc,"wptag");

float fDwp1 = GetDistanceToObject (oWp1);

int nAction = GetLocalInt (oNpc, "actioncounter");

if (fDwp1 >= 0.3) {SetLocalInt (oNpc,"atloc",0);DelayJump(oNpc,oWp1);}

if (fDwp1 <= 0.5)

{switch (nWptag)

{

case 1:

//Location at WP_ANVIL

SetLocalInt (oNpc,"atloc",1);

    {switch (nAction)

              {

                    default:

//Anvil animation #1

//Equip sword and hammer if not already equipped

//Initialize hammering sound

EquipNewItem(oNpc, sHammer, 4);

DelayCommand (0.4, EquipNewItem(oNpc, sSword2, 5));

       NpcBlacksmithSpeak (nSpeak);

DelayCommand (0.5, SoundObjectPlay(oSoundHammer));

       ActionPlayCustomAnimation (oNpc, "craft01",1,5.9);

                    SetLocalInt (oNpc, "actioncounter",1);

                    break;   

                    case 1:

//Anvil animation #2

       NpcBlacksmithSpeak (nSpeak);

       ActionPlayCustomAnimation (oNpc, "craft01",1,5.9);

                    SetLocalInt (oNpc, "actioncounter",2);

                    break;

                    case 2:

//Anvil animation #3

//disable hammering sound

//set wptag to 3 and go to location for quench

       NpcBlacksmithSpeak (nSpeak);

DelayCommand (6.0, SoundObjectStop(oSoundHammer));

       ActionPlayCustomAnimation (oNpc, "craft01",1,5.9);                   

                    SetLocalInt (oNpc, "actioncounter",0); 

                    SetLocalInt (oNpc, "wptag" ,3); 

SetLocalInt (oNpc, "control", 0);             

                    break;

                    }

                }

break;

case 2:

//Location at WP_FORGE

SetLocalInt (oNpc,"atloc",1);

    {switch (nAction)

              {

                    default:

//Forge animation #1

//remove sword from hand 

       NpcBlacksmithSpeak (nSpeak);

DelayCommand (1.1, DestroyItemInSlot (oNpc,5));

       ActionPlayCustomAnimation(oNpc,"openlock",0,2.0);

                    SetLocalInt (oNpc, "actioncounter",1);

                    break;   

                    case 1:

//Forge animation #2

       NpcBlacksmithSpeak (nSpeak);

       ActionPlayCustomAnimation (oNpc, "dustoff",0,5.9);

                    SetLocalInt (oNpc, "actioncounter",2);

                    break;

                    case 2:

//Forge animation #3

//Get red hot sword from forge

//set wptag to 1 and go to location for hammering

       NpcBlacksmithSpeak (nSpeak);

DelayCommand (1.1, EquipNewItem(oNpc, sHammer, 4));

DelayCommand (1.3, EquipNewItem(oNpc, sSword2, 5));

       ActionPlayCustomAnimation(oNpc,"openlock",0,2.0);                   

                    SetLocalInt (oNpc, "actioncounter",0); 

                    SetLocalInt (oNpc, "wptag" ,1);

SetLocalInt (oNpc, "control", 0);              

                    break;

                    }

                }

break;

case 3:

//Location WP_QUENCH

SetLocalInt (oNpc,"atloc",1);

    {switch (nAction)

              {

                    default:

//Quench Animation #1 

//Dip sword in water and drop it

//Initialize steam sound and fx

       NpcBlacksmithSpeak (nSpeak);

DelayCommand (3.0, DestroyItemInSlot (OBJECT_SELF,5));

DelayCommand (1.0, SoundObjectPlay(oSoundObject));

DelayCommand (1.1, ApplyEffectToObject(DURATION_TYPE_PERMANENT, EffectNWN2SpecialEffectFile("fx_chimney"), oEffectObject));

       ActionPlayCustomAnimation(OBJECT_SELF,"torchlightground",0,4.1);

                    SetLocalInt (oNpc, "actioncounter",1);

                    break;   

                    case 1:

//Quench Animation #2

       NpcBlacksmithSpeak (nSpeak);

       ActionPlayCustomAnimation (oNpc, "yawn",0,5.9);

                    SetLocalInt (oNpc, "actioncounter",2);

                    break;

                    case 2:

//Quench Animation #3

//Disable steam sound and fx

//Reach down and grab the sword (no longer red hot)

//set wptag to 2 and go to location for forge

       NpcBlacksmithSpeak (nSpeak);

SoundObjectStop(oSoundObject);

RemoveSEFFromObject(oEffectObject, ("fx_chimney"));

DelayCommand (2.8, EquipNewItem(oNpc, sHammer, 4));

DelayCommand (3.0, EquipNewItem(oNpc, sSword, 5));

       ActionPlayCustomAnimation(OBJECT_SELF,"torchlightground",0,4.1);

SetLocalInt (oNpc, "actioncounter",0); 

                    SetLocalInt (oNpc, "wptag" ,2);

SetLocalInt (oNpc, "control", 0);             

                    break;

                    }

                }

break;

}

}

}

               
               

               
            

[Legacy_henesua]

               

Don't forget those includes.

               
               

               
            

[Legacy_WhiteTiger]

               

You did the post you could wait someone provide the script you want, it was disappointing to know that you self-discovered the code. I have NWN2 installed... 

 

Anyway, I'm happy to know that you reach it, I hope the script works as well you need.

               
               

               
            

[Legacy_Pstemarie]

               

You did the post you could wait someone provide the script you want, it was disappointing to know that you self-discovered the code. I have NWN2 installed... 

 

Anyway, I'm happy to know that you reach it, I hope the script works as well you need.

 

A fella sent me a PM saying that notepad++ could open .res files. Rather than waste other people's time I figured I'd post the code so they'd know I'd gotten it. As it turned out I couldn't use the NWN2 code, but it turned out to be a good reference for my own code.