Why Am I having Trouble Seeing CEP 2.4 Content??

[Legacy_Calvinthesneak]

               

Kurdt19XX wrote...

1.69 + CEP 2.4a all the tests that i'm doing are performed on a module with only CEP's hak and NWN v1.69.

But it isn't a matter....Calvin was great and the best ones are now working fine.
I've just done test with Human Male Phenotype Normal and i've notice that also for this phenotype the numbers

065 088 089 097 098 105 110 are completely invisible....also the icon in inventory looks like a naked chest...

Instead in female models 088 and 089 are clearly women's robe...so I think that could be right so.

Now I'm keep testing only because it could be useful for other ... and for Calvin of course if he has time to waste with me '>.

However for Human male except the numbers that I said all works really better!!!
I wanna thanks again Calvin and Wild for your kindness and courtesy!

Now I'll try another test for female human and may be tomorrow I'll look out for some other tests.

How I think for models

065 088 089 097 098

no problem....are wome's robes!

From 105 to 110 are again invisible but this can be so......I don't know why...

To sum up aonly the number 135 is still bugged for female.
Now in Italy is 1:10 AM and I'm going to sleep....goodnight see you tomorrow!!!


Thanks again!

The numbers you are listing, are they the numbers from the toolset?  It might explain why they do not line up with anything at all I have seen.  If you're using the CEP 2.4 starter module, use the tailoring models, they give the model number instead of ordering them by ACValue column.

EDIT:  Yeah you used toolset numbers.  65,88,89,97,98 are female only.  135 = model 38, which is a bioware model, I will do transforms for that one.

I suspect 105-110 are models that are in the CEP haks, but not listed in the 2da file.  There is nothing, there are missing textures, they appear to just be variants of robes that are currently in the haks.
               
               

               

                     Modifié par Calvinthesneak, 08 décembre 2011 - 03:54 .
                     
                  

            

[Legacy_Kurdt19XX]

               I'm sorry if the informations i give to you were useless.....i just wanna help you but, how i said, i don't know how hak works...so forgive me!
However what you have done untill now it's more that i expected and i thank you again!

Now there's just another thing...if you can and if doesn't take you too much time, can you fix also robes for larger and jousting (normal and large) phenotypes? Aslo only large phenos could be great!!!!

I've tried for human male large they didn't works at all in the same way for already fixed robes!
For the jousting ones I've not tired at all but I think they probably has affected by the same problem...

How you be done untill now is more than sufficient and if you can do the same for larger phenos I think you'll be done all that i needed!!!
               
               

               

                     Modifié par Kurdt19XX, 08 décembre 2011 - 09:41 .
                     
                  

            

[Legacy_Kurdt19XX]

               

Calvinthesneak wrote...

The numbers you are listing, are they the numbers from the toolset?  It might explain why they do not line up with anything at all I have seen.  If you're using the CEP 2.4 starter module, use the tailoring models, they give the model number instead of ordering them by ACValue column.

No I didn't use the tailoring model but I've placed on the ground 140 clothes every one with a dofferent and progressive aspect of robes. All of theme have AC = 0. Then I equipped every cloths one by one and I had noticed the effect on the PC appearance in game, on the ground and while PC is mounting horse.

Calvinthesneak wrote...

EDIT:  Yeah you used toolset numbers.  65,88,89,97,98 are female only.  135 = model 38, which is a bioware model, I will do transforms for that one.

Yes...has i said!

Calvinthesneak wrote...

I suspect 105-110 are models that are in the CEP haks, but not listed in the 2da file.  There is nothing, there are missing textures, they appear to just be variants of robes that are currently in the haks.

No problem with this! I had the suspect that it could be somthing like that.
               
               

               
            

[Legacy_Kurdt19XX]

               Now there's just another thing...if you can and if doesn't take you too
much time, can you fix also robes for larger and jousting (normal and
large) phenotypes? Aslo only large phenos could be great!!!!

I've tried for human male large they didn't works at all in the same way for already fixed robes!
For the jousting ones I've not tired at all but I think they probably has affected by the same problem...

How
you be done untill now is more than sufficient and if you can do the
same for larger phenos I think you'll be done all that i needed!!!
               
               

               
            

[Legacy_Calvinthesneak]

               Easier to do jousting(for normal) than the large phenotypes..

I can do the large phenotypes, but there may not be all the robe options there is for normal phenotype.  The large phenotype means I'll have to pull a another file set.  I'll think about it tomorrow or on sunday.
               
               

               
            

[Legacy_Kurdt19XX]

               This could be great!!!
Take it easy, no problem!

See you soon Calvin!
               
               

               
            

[Legacy_Calvinthesneak]

               http://www.fileden.c..._add_phenos6.7z

Ok, update, has jousting phenotype covered.  Hak now covers phenotype 3 (normal, riding), and 8 (normal, jousting).
               
               

               
            

[Legacy_wyldhunt1]

               Thank you!
               
               

               
            

[Legacy_Kurdt19XX]

               You're great!!!
               
               

               

                     Modifié par Kurdt19XX, 10 décembre 2011 - 09:57 .
                     
                  

            

[Legacy_Calvinthesneak]

               http://www.fileden.c..._add_phenos6.7z

Ok. Standard Phenotype, 3 (normal riding), 6 (normal, jousting), 5 (large riding), 8 (large jousing). This should conclude my work.

Note that the Large phenotype is missing a number of robes available to normal phenotype.
               
               

               

                     Modifié par Calvinthesneak, 12 décembre 2011 - 06:19 .
                     
                  

            

[Legacy_Kurdt19XX]

               I can only thank you again!
You were so kind  and helpful that i'm going to put a statue of you in my module!!!!
See you soon and thanks, thanks, thanks!


EDIT: I'm tring the new robes for large phenotype but it seems that no one of them works for new robes...no one!
This is how it should work?
               
               

               

                     Modifié par Kurdt19XX, 14 décembre 2011 - 08:32 .
                     
                  

            

[Legacy_Calvinthesneak]

               So what happens?  Robe sits on ground level?  Doesn't appear at all?
               
               

               
            

[Legacy_Kurdt19XX]

               Yes it is so....there is the first original problem I described to you also with pictures I posted.
For larger phenos no one of the new robes works at all while riding.
               
               

               
            

[Legacy_Kurdt19XX]

               
               
               

               

                     Modifié par Kurdt19XX, 15 décembre 2011 - 08:12 .
                     
                  

            

[Legacy_Calvinthesneak]

               Will try to have a look on the weekend, mad rush before christmas.