I could use some help from you all with haks

[Legacy_Tonden_Ockay]

               

you would have to edit every forest tile and change the walkmesh and replace the value that uses the dry floor to grass

 

This sounds like a lot of work. But I really want to do this

 

After I seen this screen shot

 

 

 

I would love to have this look for my woods.

 

So this is what I am aiming for. I think biorural.hak grass combined with bioforest.hak would get me really close.

 

Edit: I just don't know how to do what all you just said I will need to do. '>

               
               

               
            

[Legacy_Tonden_Ockay]

               

you would have to edit every forest tile

 

 

I am guessing you mean all the pics under models ( .mdl files). I was looking and seen there is all kinds of forest pics. So that is why I am guessing all these would need changed.

 

change the walkmesh

 

 

all the  .wok files I am guessing.

 

replace the value that uses the dry floor to grass

 

 

not sure on this one

 

s

               
               

               
            

[Legacy_boodah83]

               

I'm not a 100% sure, but I think this can be done in a bulk for all the forrest mdl's with CM3 (link). Though it has been maybe 6 years since I last used it, so I'd wait for someone who actually knows what he's doing to weigh in on this.

               
               

               
            

[Legacy_Shadooow]

               

I'm not a 100% sure, but I think this can be done in a bulk for all the forrest mdl's with CM3 (link). Though it has been maybe 6 years since I last used it, so I'd wait for someone who actually knows what he's doing to weigh in on this.

Indeed I think the option change walkmesh material would work. But this is now not neccessary as the hak for the forest in the screenshot has been released on vault.

               
               

               

                     Modifié par Shadooow, 13 juin 2015 - 01:09 .
                     
                  

            

[Legacy_Pstemarie]

               

Yes you can change walkmesh values in CM3.  Since you just want to change the walkmesh values I would use the following parameters:

 

snap = no

snap tverts = no

shadow = default

repivot = none

cull invisible = no

apply water fixups = no

raise/lower tileset = no

slice for tilefade = no

change walkmesh material = yes from 1 to 3

tree foliage = ignore

splotches = ignore

placeable with transparency = no

               
               

               
            

[Legacy_meaglyn]

               

Indeed I think the option change walkmesh material would work. But this is now not neccessary as the hak for the forest in the screenshot has been released on vault.

This would be a good opportunity for a link, no?

               
               

               
            

[Legacy_boodah83]

               

This would be a good opportunity for a link, no?

 

Here you go, though it's the project right on top of the front page atm.

               
               

               
            

[Legacy_ehye_khandee]

               

There are a set of what appear to be similar mods here

 

http://neverwinterva...t/nwncq-project

 

IDK if they may help or not, but seem to have a similar goal, offered as hak and override.

               
               

               
            

[Legacy_NWN_baba yaga]

               

well NWNcq from chico is very different in style and many added "decorational" objects from the tiles dont fit their walkmesh (the crypt, caves and forest comes to my mind)... but thats just my oppinion. Rural looked to me like some zelda stuff '>

               
               

               
            

[Legacy_Tonden_Ockay]

               

Thanks all

 

That was what I was after. Now I just got to find out how to get it to work with CEP tilesets '>